With a wide variety of tillage tools and parts like field cultivators, sweeps, tines, furrowers, plow shares, moldboards, shins, chisel and subsoiler points, ripper points, oil bath bearings, hipper parts and other tillage tools, Quality Farm Supply has everything you need to break ground, without breaking the bank. Our products fit models like Allis-Chalmers, Case IH, John Deere, Krause, Rome, Sundance, Towner, Sunflower and more.
AgSmart
4-13/16 INCH SPOOL FOR OTHER MAKES
SKU: 864-SMA2093
Concave spacer with machined bearing surface, 2 3/16" tall x 4 13/16" o.d.
Concave spacer with machined bearing surface, 2 3/16" tall x 4 13/16" o.d.
$12.366
In stock, 429 units
AgSmart
BEARING HOUSING FOR CASE IH
SKU: 864-SMA193907
Bearing Housing. Fits CIH 330, 335VT - 340, 345, 370, 375 Disk - 690, 870, 875 Ripper. Will replace 193907A1.
Bearing Housing. Fits CIH 330, 335VT - 340, 345, 370, 375 Disk - 690, 870, 875 Ripper. Will replace 193907A1.
$56.187
In stock, 4 units
Osmundson
24 INCH X 1/4 INCH NOTCHED DISC BLADE WITH 1-1/2 SQ X 1-5/8 RND AXLE
SKU: 114-24140511N
$75.466
In stock, 548 units
Osmundson
1/4 X 2-1/2 X 11 INCH SPRING TOOTH CULTIVATOR POINT - 3/8 BOLT
SKU: 686-BT14
Cultivator Point - fits Crustbuster and Kent - It is 1/4 Inch thick x 11 Inch long x 2 1/2 Inch wide at point
Cultivator Point - fits Crustbuster and Kent - It is 1/4 Inch thick x 11 Inch long x 2 1/2 Inch wide at point
$10.676
In stock, 332 units
AgSmart
LEFT HAND DISC SCRAPER ARM FOR JOHN DEERE
SKU: 864-SMA240887
JD Scraper ArmRH Rear, LH FrontRepl AN240887Qty: (1pc)Scraper Arm with 5/8 inch std. width slot. RH REAR, LH FRONT. Fits 215, 235, 627, 630, 635, 637 disc and 726 Finisher. Uses spiral pin SPC3121250 (5/16 inch X 1-1/4 inch ). Will replace AN240887.
JD Scraper ArmRH Rear, LH FrontRepl AN240887Qty: (1pc)Scraper Arm with 5/8 inch std. width slot. RH REAR, LH FRONT. Fits 215, 235, 627, 630, 635, 637 disc and 726 Finisher. Uses spiral pin SPC3121250 (5/16 inch X 1-1/4 inch ). Will replace AN240887.
$41.076
In stock, 57 units
12 INCH DURAFACED JOYCE SWEEP WITH 7/16 INCH BOLT HOLES
SKU: 2127-11212DF
$38.837
In stock, 260 units
Osmundson
20 INCH X 6.5MM SAMURAI 330 TURBO BLADE FOR 1-1/2 INCH ROUND AXLE
SKU: 114-SMA30573SA
SAMURAI Edge Turbo Blade Right Hand. Replaces CNH 87630573, 47654439.
SAMURAI Edge Turbo Blade Right Hand. Replaces CNH 87630573, 47654439.
$105.793
In stock, 646 units
AgSmart
1-1/2 INCH X 68.2 INCH SQUARE AXLE
SKU: 868-SMA549979
Replaces IH 549979R1
Replaces IH 549979R1
$282.687
In stock, 23 units
AgSmart
1 INCH CHROME DANISH CULTIVATOR POINT
SKU: 693-8601
Includes bolt, nut, and rubber shim. Replaces Acra-Plant 8601-01
Includes bolt, nut, and rubber shim. Replaces Acra-Plant 8601-01
$10.044
In stock, 400 units
AgSmart
4-1/2 INCH SPOOL FOR JOHN DEERE
SKU: 864-SMA15144
Spool, 4 1/2" x 2 1/4", 1 1/8" square hole.
Spool, 4 1/2" x 2 1/4", 1 1/8" square hole.
$13.754
In stock, 168 units